TRACKING IN YAHOO WHILE CHATTING CHECK THIS OUT
Hear is the trick..
1)open this link
http://shivampatel.net/trace
2)type ur id on the text box give
3)open ur yahoo id u will get a mail regarding this……
4)while chatting in yahoo send this link http://acmepeers.com/?u=omo to the target and allow them to click it
5)PERSON TRACKED…u will get mail regarding country ,city,latitude longtidue, IP ADDRESS,about his system………..
Saturday, November 24, 2007
Ways to get Users IP address
1: Intro 2: Tools you need. 3: Using x net vision. 4: Defind type of ports. 5: Grabb the ip. 6: Scanning the ip. 7: Ways of using the ip. 8: What if the ips proxyed. 9: How to proxy your ip. 10: Why proxy your ip. 11: Whats the purpose of proxying a ip.
------------------------------------
1: Intro This text will tell you alot about ips and how to get them also tells you how to stop a user from obtaining your ip address this text i take no responcablity in what you do with it or how you use my knowledge most of what i will say in this text will tell you how a user gets your ip address then it will teach you how to shield your self so that a user off the net cant get your ip address many ways to get a ip and there is a few ways to stop that from taking place i will just be giving out one way of stoping that the other way is changing your ip address but no i will not teach that cause that is illegal what is said in this text some things are illegal some are not i strongly suggest that you read it and learn from it but dont use the info in a bad way. One thing i always say and stand by is dont use knowledge from the bad of man kind use it for the greater good.
------------------------------------
2: Tools you need. There are a few tools you will need to obtain a ip address i will tell you them and what they all do . X net vision. netstat whois or msdos Now i tell you what all those programs do. x-net-vision = its a program that gets the ips ports and host names of any ip thats connected to your ip. netstat = is also a program that does the same thing as x net vision but this only gets the ips that are directly connected to your ip. whois = this is a program that tells you the ips isp and tells the address of the isp now for those that dont know here is what ip and isp means ip stands for internet protocol isp stands for internet service provider the one that provides you with your internet. ms dos = this is command prompt some people likes it better some do not. its good for many things some commands are ping netstat -n netstat -a netstat those are ones we will be looking at. Actly all these can be found on my site www.net-demons-inc.com.
------------------------------------
3: Using x net vision. Ok first off this part will tell you how to use x net vision and netstat viewer. Load x net vision up and click refresh you will see in the list view all ips and ports and host names that are connected to you right now. Double clicking any of those ips will bring up a box that you can copy the ip host name. With netstat viewer it will show you the ips directly connected to you right now double click those does the same. Now whois open that type in the ip and click look up that will show you the info on the ip address.
------------------------------------
4: Defind type of ports. This part of the text will defind a few ports that you might see. 5050 5001 5000 5101 80 8001 8080 8002 now those are ports that you will see. 5050 is the standard port for connecting to yahoo's server. 5001 and 5000 are voice ports for voice servers if your on voice you will see these ports on the ip. 5101 is the standard port for sending and recieving pms. 80 is the standard port for website browsing or getting a file from yahoo send file. 8001 8002 these are ports for loging into yahoo in website using proxys. 8080 is also for website browsing
------------------------------------
5: Grabb the ip. Now that you have read all that lets grab a ip usig x net vision. your first step is to figure out how your going to direct connect to this user i will tell you a bit about this. the things that you can get a ip from are. webcam viewing or showing. send a file add as a friend and send them a pm add as a friend and voice chat with them. Now lets talk about these really fast. If you plan on sending them a file or having them send you a file then you dont need them added to get there ip. if you plan on letting them see your cam or you see there cam you can get there ip and dont need them added to do so. now if you plan on using voice or pm to get the ip they must be added to your buddy list first. Now determon how your going to get there ip and i will tell you the methods are how you do doing all 5 of them. Letting them view your cam. Open x net vision first click refresh make sure no pms are open just the dudes pm that you wanna get the ip for. when they get on your cam just refresh on x net vision you should see a new ip on there double click that new ip and that will be theres viewing there cam. Open x net vision make sure all pms are closed all chats are closed just his or her pm open click refresh. click the accept cam invite and wait untill you see her or him then click refresh again double click the new ip thats his or her ip. Send a file. This is the easyst one to do honestly. first off if you are sending the file what you need to do is get x net vision up click refresh after that send the file keep clickin refresh each 6 seconds you will see a ip and port 80 when you do thats there ip address double click it and copy. when recieving a file do the same method open x net vision refresh then download the file and keep clicking refresh when you see port 80 double click it thats the ip. Send Pm This is the hardst one to do. First off the id must be added to your buddy list before you can get the ip off a pm. after he or she is added what you do is open x net vision click refresh double click her or his id off your buddy list and send a pm when he or she replys back you will get a ip on port 5101 thats there ip address. now voice is hard also. you have to do the same thing as send pm. then enable voice when x net vision gets port 5001 or 5000 thats there ip address this method can not work in chat.
------------------------------------
6: Scanning the ip. Now this isnt required so i will tell a little about this. Get a scanner that scans a ip for open ports. and scan it the open ports is kinda like access to there pc and most of the ports that are open on a pc can be used for getting into there pc but thats all i tell about this.
----------
7: Ways of using the ip. Now after you get there ip there are a few things you can do with this. 1: take the ip offline. 2: hack it. 3: see how fast it is. 4: flooding it. now i dont support info on hacking or flooding a ip so i will tell you how to take a ip offline and how to see if the ips fast the other two is on you to learn and if you want to learn from me that will cost you money. Now to take a ip offline is pretty easy to do. i use the ping method a pod attact ping of death comand.... ping -l 6550 -n 200 ip used in ms dos i wont tell you how to use this but thats all i will say about this. Now to test a ip and see how fast it is use ms dos command ping do this ping ip ping website in msdos.
------------------------------------
8: What if the ips proxyed. Now some people has there ip proxyed this makes it hard to get a ip because when you try to grab the ip all you get is a proxy. what does ip proxy means it means that you make your ip a proxy meaning the proxy ip becomes your ip address it dont change your ip just makes it so when you directly connect to someone the proxy holds the place of your true ip so they get a proxy and not a ip.
------------------------------------
9: How to proxy your ip. There are many ways of doing this. My way is a program i made that uses a list of proxys and changes my ip to that proxy. another way is using a annous program that makes you stay annous over the net.
------------------------------------
10: Why proxy your ip. the reason to proxy your ip is so that no one can get your real ip if your ip is proxyed then when they send a file or you view them or they view you or you add them and pm them any direct connectiong with you and them all they get is a proxy ip thats it no ip at all and if they do a whois on that proxy all they see is a website.
-----------------------------------
11: Whats the purpose of proxying a ip. the purpose is to make it hard to obtain your ip address so you dont get hacked or any thing.
------------------------------------
1: Intro This text will tell you alot about ips and how to get them also tells you how to stop a user from obtaining your ip address this text i take no responcablity in what you do with it or how you use my knowledge most of what i will say in this text will tell you how a user gets your ip address then it will teach you how to shield your self so that a user off the net cant get your ip address many ways to get a ip and there is a few ways to stop that from taking place i will just be giving out one way of stoping that the other way is changing your ip address but no i will not teach that cause that is illegal what is said in this text some things are illegal some are not i strongly suggest that you read it and learn from it but dont use the info in a bad way. One thing i always say and stand by is dont use knowledge from the bad of man kind use it for the greater good.
------------------------------------
2: Tools you need. There are a few tools you will need to obtain a ip address i will tell you them and what they all do . X net vision. netstat whois or msdos Now i tell you what all those programs do. x-net-vision = its a program that gets the ips ports and host names of any ip thats connected to your ip. netstat = is also a program that does the same thing as x net vision but this only gets the ips that are directly connected to your ip. whois = this is a program that tells you the ips isp and tells the address of the isp now for those that dont know here is what ip and isp means ip stands for internet protocol isp stands for internet service provider the one that provides you with your internet. ms dos = this is command prompt some people likes it better some do not. its good for many things some commands are ping netstat -n netstat -a netstat those are ones we will be looking at. Actly all these can be found on my site www.net-demons-inc.com.
------------------------------------
3: Using x net vision. Ok first off this part will tell you how to use x net vision and netstat viewer. Load x net vision up and click refresh you will see in the list view all ips and ports and host names that are connected to you right now. Double clicking any of those ips will bring up a box that you can copy the ip host name. With netstat viewer it will show you the ips directly connected to you right now double click those does the same. Now whois open that type in the ip and click look up that will show you the info on the ip address.
------------------------------------
4: Defind type of ports. This part of the text will defind a few ports that you might see. 5050 5001 5000 5101 80 8001 8080 8002 now those are ports that you will see. 5050 is the standard port for connecting to yahoo's server. 5001 and 5000 are voice ports for voice servers if your on voice you will see these ports on the ip. 5101 is the standard port for sending and recieving pms. 80 is the standard port for website browsing or getting a file from yahoo send file. 8001 8002 these are ports for loging into yahoo in website using proxys. 8080 is also for website browsing
------------------------------------
5: Grabb the ip. Now that you have read all that lets grab a ip usig x net vision. your first step is to figure out how your going to direct connect to this user i will tell you a bit about this. the things that you can get a ip from are. webcam viewing or showing. send a file add as a friend and send them a pm add as a friend and voice chat with them. Now lets talk about these really fast. If you plan on sending them a file or having them send you a file then you dont need them added to get there ip. if you plan on letting them see your cam or you see there cam you can get there ip and dont need them added to do so. now if you plan on using voice or pm to get the ip they must be added to your buddy list first. Now determon how your going to get there ip and i will tell you the methods are how you do doing all 5 of them. Letting them view your cam. Open x net vision first click refresh make sure no pms are open just the dudes pm that you wanna get the ip for. when they get on your cam just refresh on x net vision you should see a new ip on there double click that new ip and that will be theres viewing there cam. Open x net vision make sure all pms are closed all chats are closed just his or her pm open click refresh. click the accept cam invite and wait untill you see her or him then click refresh again double click the new ip thats his or her ip. Send a file. This is the easyst one to do honestly. first off if you are sending the file what you need to do is get x net vision up click refresh after that send the file keep clickin refresh each 6 seconds you will see a ip and port 80 when you do thats there ip address double click it and copy. when recieving a file do the same method open x net vision refresh then download the file and keep clicking refresh when you see port 80 double click it thats the ip. Send Pm This is the hardst one to do. First off the id must be added to your buddy list before you can get the ip off a pm. after he or she is added what you do is open x net vision click refresh double click her or his id off your buddy list and send a pm when he or she replys back you will get a ip on port 5101 thats there ip address. now voice is hard also. you have to do the same thing as send pm. then enable voice when x net vision gets port 5001 or 5000 thats there ip address this method can not work in chat.
------------------------------------
6: Scanning the ip. Now this isnt required so i will tell a little about this. Get a scanner that scans a ip for open ports. and scan it the open ports is kinda like access to there pc and most of the ports that are open on a pc can be used for getting into there pc but thats all i tell about this.
----------
7: Ways of using the ip. Now after you get there ip there are a few things you can do with this. 1: take the ip offline. 2: hack it. 3: see how fast it is. 4: flooding it. now i dont support info on hacking or flooding a ip so i will tell you how to take a ip offline and how to see if the ips fast the other two is on you to learn and if you want to learn from me that will cost you money. Now to take a ip offline is pretty easy to do. i use the ping method a pod attact ping of death comand.... ping -l 6550 -n 200 ip used in ms dos i wont tell you how to use this but thats all i will say about this. Now to test a ip and see how fast it is use ms dos command ping do this ping ip ping website in msdos.
------------------------------------
8: What if the ips proxyed. Now some people has there ip proxyed this makes it hard to get a ip because when you try to grab the ip all you get is a proxy. what does ip proxy means it means that you make your ip a proxy meaning the proxy ip becomes your ip address it dont change your ip just makes it so when you directly connect to someone the proxy holds the place of your true ip so they get a proxy and not a ip.
------------------------------------
9: How to proxy your ip. There are many ways of doing this. My way is a program i made that uses a list of proxys and changes my ip to that proxy. another way is using a annous program that makes you stay annous over the net.
------------------------------------
10: Why proxy your ip. the reason to proxy your ip is so that no one can get your real ip if your ip is proxyed then when they send a file or you view them or they view you or you add them and pm them any direct connectiong with you and them all they get is a proxy ip thats it no ip at all and if they do a whois on that proxy all they see is a website.
-----------------------------------
11: Whats the purpose of proxying a ip. the purpose is to make it hard to obtain your ip address so you dont get hacked or any thing.
folder tips
CREATE A FOLDER WITHOUT ANY NAME
create a folder without any name...
just type these codes while renaming the folder n press enter once...
alt+0160
OR
alt+255
check out
Another one check out
Microsoft fails to solve these problem- Really Interesting
MAGIC #1
An Indian discovered that nobody can create a FOLDER anywhere on the
computer which can be named as "CON". This is something pretty
cool...and unbelievable... At Microsoft the whole Team, couldn't
answer why this happened!
TRY IT NOW ,IT WILL NOT CREATE " CON " FOLDER
MAGIC #2
For those of you using Windows, do the following:
1.) Open an empty notepad file
2.) Type "Bush hid the facts" (without the quotes)
3.) Save it as whatever you want.
4.) Close it, and re-open it.
is it just a really weird bug? :-??
MAGIC #3
Microsoft crazy facts
This is something pretty cool and neat...and unbelievable... At
Microsoft the whole Team, including Bill Gates, couldn't answer why
this happened! It was discovered by a Brazilian. Try it out
yourself...
Open Microsoft Word and type
=rand (200, 99)
And then press ENTER
then see the magic...............................
create a folder without any name...
just type these codes while renaming the folder n press enter once...
alt+0160
OR
alt+255
check out
Another one check out
Microsoft fails to solve these problem- Really Interesting
MAGIC #1
An Indian discovered that nobody can create a FOLDER anywhere on the
computer which can be named as "CON". This is something pretty
cool...and unbelievable... At Microsoft the whole Team, couldn't
answer why this happened!
TRY IT NOW ,IT WILL NOT CREATE " CON " FOLDER
MAGIC #2
For those of you using Windows, do the following:
1.) Open an empty notepad file
2.) Type "Bush hid the facts" (without the quotes)
3.) Save it as whatever you want.
4.) Close it, and re-open it.
is it just a really weird bug? :-??
MAGIC #3
Microsoft crazy facts
This is something pretty cool and neat...and unbelievable... At
Microsoft the whole Team, including Bill Gates, couldn't answer why
this happened! It was discovered by a Brazilian. Try it out
yourself...
Open Microsoft Word and type
=rand (200, 99)
And then press ENTER
then see the magic...............................
Windiws X Psecret
Deleting System Softwares:
XP hides some system software you might want to remove, such as Windows Messenger, but you can tickle it and make it disgorge everything. Using Notepad or Edit, edit the text file /windows/inf/ sysoc.inf, search for the word 'hide' and remove it. You can then go to the Add or Remove Programs in the Control Panel, select Add/Remove Windows Components and there will be your prey, exposed and vulnerable.
Creating Shutdown Icon or One Click Shutdown:
Navigate to your desktop. On the desktop, right-click and go to New, then to Shortcut (in other words, create a new shortcut). You should now see a pop-up window instructing you to enter a command line path.
Use this path in "Type Location of the Item"
SHUTDOWN -s -t 01
If the C: drive is not your local hard drive, then replace "C" with the correct letter of the hard drive. Click the "Next" button. Name the shortcut and click the "Finish" button. Now whenever you want to shut down, just click on this shortcut and you're done.
Increasing Band-Width By 20%:
Microsoft reserves 20% of your available bandwidth for their own purposes like Windows Updates and interrogating your PC etc
To get it back:
Click Start then Run and type " gpedit.msc" without quotes.This opens the group policy editor. Then go to:
Local Computer Policy then Computer Configuration then Administrative Templates then Network then QOS Packet Scheduler and then to Limit Reservable Bandwidth.
Double click on Limit Reservable bandwidth. It will say it is not configured, but the truth is under the 'Explain' tab i.e."By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default."
So the trick is to ENABLE reservable bandwidth, then set it to ZERO. This will allow the system to reserve nothing, rather than the default 20%.It works on Win 2000 as well.
Renaming The Recycle Bin icon:
To change the name of the Recycle Bin desktop icon, click Start then goto Run, write Regedit and press Enter. It opens Registry Editor. Now in Registry Editor go to:
HKEY_CLASSES_ ROOT/CLSID/ {645FF040- 5081-101B- 9F08-00AA002F954 E}
and change the name "Recycle Bin" to whatever you want (don't type any quotes).
Managing Tasks:
You can at last get rid of tasks on the computer from the command line by using 'taskkill /pid' and the task number, or just 'tskill' and the process number. Find that out by typing 'tasklist', which will also tell you a lot about what's going on in your system.
Removing Shared Documents folder From My Computer window:
Open registry editor by going to Start then Run and entering regedit. Once in registry, navigate to key
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ My Computer \ NameSpace \ DelegateFolders
You must see a sub-key named {59031a47-3f72- 44a7-89c5- 5595fe6b30ee} . If you delete this key, you have effectively removed the my shared documents folder.
Making Google the Default Search Engine in Internet Explorer:
Open registry editor by going to Start then Run and entering regedit and navigate to following three keys separately and change it as shown below:
[HKEY_CURRENT_ USER\Software\ Microsoft\ Internet Explorer\Main]
"Search Page"=" http://www.google. com"
"Search Bar"=" http://www.google. com/ie"
[HKEY_CURRENT_ USER\Software\ Microsoft\ Internet Explorer\SearchURL]
""=" http://www.google. com/keyword/ %s"
[HKEY_LOCAL_ MACHINE\SOFTWARE \Microsoft\ Internet Explorer\Search]
"SearchAssistant" =" http://www.google. com/ie" .
Improving the Slow Boot up time:
There are a variety of reasons why your windows XP system would boot slowly. Most of the times it this has to do with the startup applications.
If you would like to speed up the bootup sequence, consider removing some of the startup applications that you do not need. Easiest way to remove startup apps is through System Configuration Utility. Go to Start then Run and enter MSCONFIG and go to the Startup tab. Deselect/UnCheck application( s) that you do not want to startup at boot time.
Customize Logon prompt with your Own Words:
Open Registry by going to Start then Run, entering regedit and Navigate to [HKEY_LOCAL_ MACHINE\SOFTWARE \Microsoft\ Windows NT\CurrentVersion\ Winlogon] . In right pane, look for key by the name "LogonPrompt" . Set its value to whatever text you want to see displayed at login screen.
IP address of your connection:
Go to Start then Run. Enter 'cmd' and then enter 'ipconfig' .Add the '/all' switch for more info .
Making Folders Private:
Open My Computer Double-click the drive where Windows is installed (usually drive (C:), unless you have more than one drive on your computer). If the contents of the drive are hidden, under System Tasks, click Show the contents of this drive.
Double-click the Documents and Settings folder. Double-click your user folder. Right-click any folder in your user profile, and then click Properties. On the Sharing tab, select the Make this folder private so that only I have access to it check box.
To change Drive Letters:
Go to Start > Control Panel > Administrative Tools > Computer Management, Disk Management, then right-click the partition whose name you want to change (click in the white area just below the word "Volume") and select "change drive letter and paths."
From here you can add, remove or change drive letters and paths to the partition.
Removing the Shortcut arrow from Desktop Icons:
Goto Start then Run and Enter regedit. Navigate to HKEY_CLASSES_ ROOTlnkfile. Delete the IsShortcut registry value. You may need to restart Windows XP.
Get Drivers for your Devices:
Visit Windows Update (XP Only)
Look at the left hand pane and under Other Options click Personalize Windows Update.
Now in the right hand pane check the box - Display the link to the Windows Update Catalog under See Also
Below Choose which categories and updates to display on Windows Update - make sure you check all the boxes you want shown.
Click Save Settings
Now look in the left hand pane under See Also click Windows Update Catalog and choose what you're looking for. Choose either MS updates or drivers for hardware devices.
Start the Wizard and off you go.
Customize Internet Explorer's Title Bar:
Open Registry by going to Start then Run and Enter regedit. Navigate to HKEY_CURRENT_ USER\Software\ Microsoft\ Internet. Explorer\Main. In right hand panel look for string "Window Title" and change its value to whatever custom text you want to see.
Disabling the use of Win Key:
If your are a gaming freak then you must be sick of the Win key in your keyboard. To disable use of Win key, open registry by going to Start then Run and entering regedit. Navigate to [HKEY_LOCAL_ MACHINE\SYSTEM\ CurrentControlSe t\Control\ Keyboard Layout] . In this look for value of "Scancode Map". Its binary data so be extra careful:
Set its value to "00 00 00 00 00 00 00 00 03 00 00 00 00 00 5B E0 00 00 5C E0 00 00 00 00" to disable the win key.
Restarting Windows without Restarting the Computer:
This one is again is. When you click on the SHUTDOWN button, make sure to simultaneous press SHIFT Button. If you hold the Shift key down while clicking on SHUTDOWN button, you computer would restart without restarting the Computer. This is equivalent to term "HOT REBOOT".
Stopping XP from displaying unread messages count on Welcome Screen:
To stop XP from displaying count of unread messages, Open registry and navigate to [HKEY_CURRENT_ USER\Software\ Microsoft\ Windows\CurrentV ersion\UnreadMai l] and look for the data key "MessageExpiryDays" . If you do not see this key, create one DWORD key by the name "MessageExpiryDays" .
Setting its value to 0 would stop Windows XP from displaying the count of unread messages.
Modify Color Selection of Default Theme:
Open registry by going to Start then Run. Entering regedit, navigate to [HKEY_USERS\ .DEFAULT\ Software\ Microsoft\ Windows\CurrentV ersion\ThemeMana ger] and locate the key "ColorName".
Right Click on it and select modify its value from "NormalColor" to "Metallic"
Click Ok, and exit regedit and restart your computer.
Removing the Recycle Bin from the Desktop:
If you don't use the Recycle Bin to store deleted files , you can get rid of its desktop icon all together. Run Regedit and go to:
HKEY_LOCAL_MACHINE/ SOFTWARE/ Microsoft/ Windows/CurrentV ersion/explorer/ Desktop/NameSpace
XP hides some system software you might want to remove, such as Windows Messenger, but you can tickle it and make it disgorge everything. Using Notepad or Edit, edit the text file /windows/inf/ sysoc.inf, search for the word 'hide' and remove it. You can then go to the Add or Remove Programs in the Control Panel, select Add/Remove Windows Components and there will be your prey, exposed and vulnerable.
Creating Shutdown Icon or One Click Shutdown:
Navigate to your desktop. On the desktop, right-click and go to New, then to Shortcut (in other words, create a new shortcut). You should now see a pop-up window instructing you to enter a command line path.
Use this path in "Type Location of the Item"
SHUTDOWN -s -t 01
If the C: drive is not your local hard drive, then replace "C" with the correct letter of the hard drive. Click the "Next" button. Name the shortcut and click the "Finish" button. Now whenever you want to shut down, just click on this shortcut and you're done.
Increasing Band-Width By 20%:
Microsoft reserves 20% of your available bandwidth for their own purposes like Windows Updates and interrogating your PC etc
To get it back:
Click Start then Run and type " gpedit.msc" without quotes.This opens the group policy editor. Then go to:
Local Computer Policy then Computer Configuration then Administrative Templates then Network then QOS Packet Scheduler and then to Limit Reservable Bandwidth.
Double click on Limit Reservable bandwidth. It will say it is not configured, but the truth is under the 'Explain' tab i.e."By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default."
So the trick is to ENABLE reservable bandwidth, then set it to ZERO. This will allow the system to reserve nothing, rather than the default 20%.It works on Win 2000 as well.
Renaming The Recycle Bin icon:
To change the name of the Recycle Bin desktop icon, click Start then goto Run, write Regedit and press Enter. It opens Registry Editor. Now in Registry Editor go to:
HKEY_CLASSES_ ROOT/CLSID/ {645FF040- 5081-101B- 9F08-00AA002F954 E}
and change the name "Recycle Bin" to whatever you want (don't type any quotes).
Managing Tasks:
You can at last get rid of tasks on the computer from the command line by using 'taskkill /pid' and the task number, or just 'tskill' and the process number. Find that out by typing 'tasklist', which will also tell you a lot about what's going on in your system.
Removing Shared Documents folder From My Computer window:
Open registry editor by going to Start then Run and entering regedit. Once in registry, navigate to key
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ My Computer \ NameSpace \ DelegateFolders
You must see a sub-key named {59031a47-3f72- 44a7-89c5- 5595fe6b30ee} . If you delete this key, you have effectively removed the my shared documents folder.
Making Google the Default Search Engine in Internet Explorer:
Open registry editor by going to Start then Run and entering regedit and navigate to following three keys separately and change it as shown below:
[HKEY_CURRENT_ USER\Software\ Microsoft\ Internet Explorer\Main]
"Search Page"=" http://www.google. com"
"Search Bar"=" http://www.google. com/ie"
[HKEY_CURRENT_ USER\Software\ Microsoft\ Internet Explorer\SearchURL]
""=" http://www.google. com/keyword/ %s"
[HKEY_LOCAL_ MACHINE\SOFTWARE \Microsoft\ Internet Explorer\Search]
"SearchAssistant" =" http://www.google. com/ie" .
Improving the Slow Boot up time:
There are a variety of reasons why your windows XP system would boot slowly. Most of the times it this has to do with the startup applications.
If you would like to speed up the bootup sequence, consider removing some of the startup applications that you do not need. Easiest way to remove startup apps is through System Configuration Utility. Go to Start then Run and enter MSCONFIG and go to the Startup tab. Deselect/UnCheck application( s) that you do not want to startup at boot time.
Customize Logon prompt with your Own Words:
Open Registry by going to Start then Run, entering regedit and Navigate to [HKEY_LOCAL_ MACHINE\SOFTWARE \Microsoft\ Windows NT\CurrentVersion\ Winlogon] . In right pane, look for key by the name "LogonPrompt" . Set its value to whatever text you want to see displayed at login screen.
IP address of your connection:
Go to Start then Run. Enter 'cmd' and then enter 'ipconfig' .Add the '/all' switch for more info .
Making Folders Private:
Open My Computer Double-click the drive where Windows is installed (usually drive (C:), unless you have more than one drive on your computer). If the contents of the drive are hidden, under System Tasks, click Show the contents of this drive.
Double-click the Documents and Settings folder. Double-click your user folder. Right-click any folder in your user profile, and then click Properties. On the Sharing tab, select the Make this folder private so that only I have access to it check box.
To change Drive Letters:
Go to Start > Control Panel > Administrative Tools > Computer Management, Disk Management, then right-click the partition whose name you want to change (click in the white area just below the word "Volume") and select "change drive letter and paths."
From here you can add, remove or change drive letters and paths to the partition.
Removing the Shortcut arrow from Desktop Icons:
Goto Start then Run and Enter regedit. Navigate to HKEY_CLASSES_ ROOTlnkfile. Delete the IsShortcut registry value. You may need to restart Windows XP.
Get Drivers for your Devices:
Visit Windows Update (XP Only)
Look at the left hand pane and under Other Options click Personalize Windows Update.
Now in the right hand pane check the box - Display the link to the Windows Update Catalog under See Also
Below Choose which categories and updates to display on Windows Update - make sure you check all the boxes you want shown.
Click Save Settings
Now look in the left hand pane under See Also click Windows Update Catalog and choose what you're looking for. Choose either MS updates or drivers for hardware devices.
Start the Wizard and off you go.
Customize Internet Explorer's Title Bar:
Open Registry by going to Start then Run and Enter regedit. Navigate to HKEY_CURRENT_ USER\Software\ Microsoft\ Internet. Explorer\Main. In right hand panel look for string "Window Title" and change its value to whatever custom text you want to see.
Disabling the use of Win Key:
If your are a gaming freak then you must be sick of the Win key in your keyboard. To disable use of Win key, open registry by going to Start then Run and entering regedit. Navigate to [HKEY_LOCAL_ MACHINE\SYSTEM\ CurrentControlSe t\Control\ Keyboard Layout] . In this look for value of "Scancode Map". Its binary data so be extra careful:
Set its value to "00 00 00 00 00 00 00 00 03 00 00 00 00 00 5B E0 00 00 5C E0 00 00 00 00" to disable the win key.
Restarting Windows without Restarting the Computer:
This one is again is. When you click on the SHUTDOWN button, make sure to simultaneous press SHIFT Button. If you hold the Shift key down while clicking on SHUTDOWN button, you computer would restart without restarting the Computer. This is equivalent to term "HOT REBOOT".
Stopping XP from displaying unread messages count on Welcome Screen:
To stop XP from displaying count of unread messages, Open registry and navigate to [HKEY_CURRENT_ USER\Software\ Microsoft\ Windows\CurrentV ersion\UnreadMai l] and look for the data key "MessageExpiryDays" . If you do not see this key, create one DWORD key by the name "MessageExpiryDays" .
Setting its value to 0 would stop Windows XP from displaying the count of unread messages.
Modify Color Selection of Default Theme:
Open registry by going to Start then Run. Entering regedit, navigate to [HKEY_USERS\ .DEFAULT\ Software\ Microsoft\ Windows\CurrentV ersion\ThemeMana ger] and locate the key "ColorName".
Right Click on it and select modify its value from "NormalColor" to "Metallic"
Click Ok, and exit regedit and restart your computer.
Removing the Recycle Bin from the Desktop:
If you don't use the Recycle Bin to store deleted files , you can get rid of its desktop icon all together. Run Regedit and go to:
HKEY_LOCAL_MACHINE/ SOFTWARE/ Microsoft/ Windows/CurrentV ersion/explorer/ Desktop/NameSpace
shutting pc in a click
Creating Shutdown Icon or One Click Shutdown:
Navigate to your desktop. On the desktop, right-click and go to New, then to Shortcut (in other words, create a new shortcut). You should now see a pop-up window instructing you to enter a command line path.
Use this path in "Type Location of the Item"
SHUTDOWN -s -t 01
If the C: drive is not your local hard drive, then replace "C" with the correct letter of the hard drive. Click the "Next" button. Name the shortcut and click the "Finish" button. Now whenever you want to shut down, just click on this shortcut and you're done.
Navigate to your desktop. On the desktop, right-click and go to New, then to Shortcut (in other words, create a new shortcut). You should now see a pop-up window instructing you to enter a command line path.
Use this path in "Type Location of the Item"
SHUTDOWN -s -t 01
If the C: drive is not your local hard drive, then replace "C" with the correct letter of the hard drive. Click the "Next" button. Name the shortcut and click the "Finish" button. Now whenever you want to shut down, just click on this shortcut and you're done.
tips,tricks and hacking
hi...friendz this d best blog where u can add your tips and tricks andcan learn hacking........
enjoy!!
enjoy!!
hiding drives
How to Hide the drives(c:,d:,e:,a:...etc)
How to Hide the drives(c:,d:,e:,a:...etc)
This is a great trick you can play on your friends. To disable the display of local or networked drives when you click My Computer.
1.Go to start->run.Type regedit.Now go to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
Now in the right pane create a new DWORD item and name it NoDrives(it is case sensitive). Now modify it's value and set it to 3FFFFFF (Hexadecimal) .Now restart your computer. So, now when you click on My Computer, no drives will be shown(all gone...). To enable display of drives in My Computer, simply delete this DWORD item that you created.Again restart your computer.You can now see all the drives again. Magic........lol....
How to Hide the drives(c:,d:,e:,a:...etc)
This is a great trick you can play on your friends. To disable the display of local or networked drives when you click My Computer.
1.Go to start->run.Type regedit.Now go to:
HKEY_CURRENT_USER\Software\Microsoft\Win
Now in the right pane create a new DWORD item and name it NoDrives(it is case sensitive). Now modify it's value and set it to 3FFFFFF (Hexadecimal) .Now restart your computer. So, now when you click on My Computer, no drives will be shown(all gone...). To enable display of drives in My Computer, simply delete this DWORD item that you created.Again restart your computer.You can now see all the drives again. Magic........lol....
Subscribe to:
Posts (Atom)
